RESOURCES

Abstract
In this paper, the Ti3C2Tx/GO frame with vertical pore gradient is constructed by using 3D printing technology. The TiO2-Ti3C2Tx heterojunctions is generated in situ by thermal annealing to control the oxidation of 3D frames. TiO2-Ti3C2Tx/rGO/PDMS composites with high EMI SE and excellent thermal management performance are assembled by curing the annealed 3D frame with polydimethylsiloxane (PDMS). Notably, the composites have a unique multilayer-scale structure that rod-shaped TiO2 particles are decorated on Ti3C2Tx substrate and TiO2-Ti3C2Tx/rGO stack to form an amorphous porous gradient pore size structure. The effect of gradient pore size on EMI SE of composites is studied by simulation. Under the synergistic effect of multiple loss mechanism, the designed composites show conductivity of up to 173.1 S/m, the thickness of the composite is 2 mm and the density is 67mg/cm3, which shows excellent EMI SE of 58 dB. The composites also have excellent thermal management performance.

Abstract
A bottleneck limiting the practical application of lithium metal anodes is the uncontrolled growth of lithium dendrites caused by gradient distributed Li+ from separators to collectors. Herein{,} 3D-printed frameworks with a gradient distributed heterojunction and fast Li+ conductivity interfaces are developed to regulate the Li+ distribution and the direction of dendrite growth. More importantly{,} the effect of different Li+ concentration gradient frameworks on Li+ deposition behavior was analyzed in detail. Synchrotron X-ray tomography demonstrates that macropores dominate the framework{,} which effectively suppresses the volume change caused by lithium deposition. DFT calculations confirm the high lithiophilicity of γ-Al2O3 and the graphene heterojunction. Synchrotron radiation-based soft X-ray absorption spectroscopy illustrates the fast Li+ conductivity Li–Al–O interface resulting from the shortened Al–O bond distance. Benefiting from the higher Li+ concentration differences during the dissolution process and Li–Al–O interfaces{,} the gradient framework can achieve a high rate performance of ∼40 mV overpotential at 10 mA cm−2 and long cycle stability of ∼1500 h at 1 mA cm−2.